RSLogix 5000 to 1398 fault

russrmartin

Member
R
Join Date
Aug 2002
Location
Eastman, Wisconsin
Posts
744
Hey guys. We've got a drive that we're putting back in that comes up with a positive soft overtravel fault every time it's enabled. The soft overtravels are disabled in the Limits tab in the PLC and set to status only, yet it still causes an axis shutdown. Has anyone seen this before? The drive is a 1398 ddm 150. I guess I'm not understanding why the fault is acting like a shutdown fault when it is set to status only. Thanks.

Russ
 

Similar Topics

P
AB PLC, Rslogix 5000, alarm issue
Hi folks, in the alarm manager of Rslogix 5000, the tag-based alarm has been created. But when I tried to change the condition, it was found the...
Replies
2
Views
151
PLCbug123
P
A
Tank level rslogix 5000 program. I’ve got errors on rung 2,3,4. Do u see the problems? Also does my geq n les look right?
Replies
4
Views
195
drbitboy
drbitboy
A
Can u help me on a RSLogix 5000 program?
I am completely stuck on building a ladder program that requires a start button to be pressed 3 times to turn on motor 1. Then motor 2 starts...
2
Replies
20
Views
574
drbitboy
drbitboy
K
Can't see "verify rung" data in RSLogix 5000
First off, I'm a hobbyist-level programmer, and this program isn't controlling anything anything that could even remotely be considered "life...
2
Replies
18
Views
513
joseph_e2
J
M
RSlogix 5000 force closing
Hello all, I have a question in regards to RSlogix 5000. I am having issues with the program force closing when I try to make online edits. We...
Replies
0
Views
119
Mangotango2018
M
Back
Top Bottom