Omron Cj1m

glenncovington

Lifetime Supporting Member
Join Date
Apr 2002
Location
Gloucester, VA
Posts
302
Hello all, I have a machine misbehaving this morning. Unfortunately, I do not have access to the PLC. The PLC is an Omron CJ1M CPU11. The OEM has sent me what I think is the original program, but I need to get it printed to PDF. Anybody out there that can open and print to PDF for me.

Thanks in advance.

Glenn
 
When I opened your program, there are quite a few sections showing error, it could be my version is not the latest. I am using CX Programmer Ver. 9.31. The following are some of the error, sorry

---------------- PLC: 'PLC' (PLC Model 'CJ1M CPU11' ) ----------------
Compiling...
[PLC/Program Name : PLC/Program]
[Ladder Section Name : Setup]
[Ladder Section Name : TouchPanel]
[Ladder Section Name : Recipe]
[Ladder Section Name : General]
WARNING: Rung exceeds the maximum size for online edit. (Extra: 75) - at rung 1 (0, 0)
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 2 ( 0, 13 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 2 ( 0, 10 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 2 ( 0, 7 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 2 ( 0, 6 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 2 ( 0, 5 ).
[Ladder Section Name : TopFeed]
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 1 ( 0, 6 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 1 ( 0, 5 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 4 ( 0, 38 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 4 ( 0, 34 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 4 ( 0, 27 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 4 ( 0, 25 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 4 ( 0, 21 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 4 ( 0, 17 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 4 ( 0, 8 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 4 ( 0, 6 ).
[Ladder Section Name : Bottom1]
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 1 ( 0, 5 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 1 ( 0, 4 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 6 ( 0, 2 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 7 ( 0, 58 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 7 ( 0, 54 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 7 ( 0, 45 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 7 ( 0, 42 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 7 ( 0, 38 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 7 ( 0, 29 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 7 ( 0, 26 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 7 ( 0, 22 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 7 ( 0, 13 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 7 ( 0, 11 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 7 ( 0, 6 ).
[Ladder Section Name : Bottom2]
 
part 1

Is this what you needed?
This is some of the sections. Had to post in 4 posts due to 5 files per post limit.
See attached files.
 
Last edited:
part 4

The rest of the files. Sorry for all the posts, maybe someone can combine the files and re-post.
 
Last edited:
Here is a screen shot of the file list so that you can view them in order.
See attached.
 

Similar Topics

Hello everyone. I am new when it comes to Omron PLCs. Currently I'm uploading program from CJ1M PLC using CS1W-CIF31 cable only. I connected the...
Replies
2
Views
99
i have been trying to connect to omron cj1m via peripheral port(USB to Serial), but there isn't any sign to show that it has connected, so am...
Replies
0
Views
292
Has anyone encountered an error code 31 on an omron cj1m-cpu12? This error code is not covered in PLC manual.
Replies
1
Views
504
Hello Guys, I have a machine that have 8 Omron 3G3MV VFDs and I am looking to migrate to Omron 3G3MX2 drives. the existing network is half duplex...
Replies
0
Views
559
Hi All, I am replacing CJ1M with CJ2M with existing IO modules and PLC program. I am facing this error. "ERROR: There are three or more...
Replies
6
Views
2,313
Back
Top Bottom