You are not registered yet. Please click here to register!


 
 
plc storereviewsdownloads
This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
 
Try our online PLC Simulator- FREE.  Click here now to try it.

---------->>>>>Get FREE PLC Programming Tips

New Here? Please read this important info!!!


Go Back   PLCS.net - Interactive Q & A > PLCS.net - Interactive Q & A > LIVE PLC Questions And Answers

PLC training tools sale

Reply
 
Thread Tools Display Modes
Old July 29th, 2006, 09:53 PM   #1
ronnyraygunn
Member
United States

ronnyraygunn is offline
 
Join Date: Jun 2006
Location: Cresson Pennsylvania
Posts: 3
Panelview 550 reset

Hello I am trying to connect to a panelview 550 cat# 2711-t5a2l1. This is a touch screen only with no keypad and a DH485 Port. I cannot connect with rslinx. I am using a pic. I tried to get into the configuration screen to see what the communications settings were. I pushed the small square on the bottom right during startup but it comes up with a password screen. I tried all the usual like 000000 and 111111 but nothing seems to work. The terminal was purchased used and I have no need for the program that is on it. Is there anyway to reset the terminal and start from scratch?
  Reply With Quote
Old July 29th, 2006, 10:19 PM   #2
Mickey
Lifetime Supporting Member
United States

Mickey is offline
 
Mickey's Avatar
 
Join Date: May 2003
Location: Palmdale,Ca
Posts: 10,120
Have you tried this:

http://domino.automation.rockwell.co...8?OpenDocument
__________________
Mickey

If you want happiness for an hour-take a nap. If you want happiness for a day-go fishing. If you want happiness for a month-getmarried. If you want happiness for a year-inherit a fortune. If you want happiness for a lifetime-help someone else.
----- Chinese Proverb
  Reply With Quote
Old July 29th, 2006, 10:22 PM   #3
rsdoran
Lifetime Supporting Member
United States

rsdoran is offline
 
rsdoran's Avatar
 
Join Date: Apr 2002
Location: Birmingham, AL
Posts: 7,372
I think the issue is you need a power supply when using a PIC straight from the PV to a computer, look at chapter 12 page 18 of the manual.
http://literature.rockwellautomation...m014_-en-p.pdf

Once connected then I think you can download another program.
__________________
http://www.patchn.com Industrial Electrical & Maintenance @ www.patchn.com "Tell me and I forget, show me and I remember, involve me and I understand."
  Reply With Quote
Old July 29th, 2006, 10:25 PM   #4
Mickey
Lifetime Supporting Member
United States

Mickey is offline
 
Mickey's Avatar
 
Join Date: May 2003
Location: Palmdale,Ca
Posts: 10,120
Quote:
Originally Posted by rsdoran
I think the issue is you need a power supply when using a PIC straight from the PV to a computer, look at chapter 12 page 18 of the manual.
http://literature.rockwellautomation...m014_-en-p.pdf

Once connected then I think you can download another program.
Too add to this:
http://domino.automation.rockwell.co...A?OpenDocument
__________________
Mickey

If you want happiness for an hour-take a nap. If you want happiness for a day-go fishing. If you want happiness for a month-getmarried. If you want happiness for a year-inherit a fortune. If you want happiness for a lifetime-help someone else.
----- Chinese Proverb
  Reply With Quote
Old July 29th, 2006, 11:12 PM   #5
ronnyraygunn
Member
United States

ronnyraygunn is offline
 
Join Date: Jun 2006
Location: Cresson Pennsylvania
Posts: 3
Ok got it going now it turnes out it was a power issue. hooked up the right cable and now it is on rslinx. thank you much. going to try the reset also. hope that clears the password for the config screen.
  Reply With Quote
Reply
Jump to Live PLC Question and Answer Forum

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Topics
Thread Thread Starter Forum Replies Last Post
PanelView 550 application upload Earn LIVE PLC Questions And Answers 6 January 30th, 2014 04:31 PM
10 year old PanelView 550 Dave_in_Oz LIVE PLC Questions And Answers 4 September 15th, 2005 11:04 AM
block transfers to panelview 550 bakerboy_99ca LIVE PLC Questions And Answers 1 February 15th, 2005 10:55 PM
PanelView 550 Problem Tom Jenkins LIVE PLC Questions And Answers 15 August 16th, 2004 12:42 PM
Not able to Communicate with Panelview 550 sanjay_snj LIVE PLC Questions And Answers 2 March 26th, 2004 06:55 AM


All times are GMT -5. The time now is 07:43 PM.


.