Hello,
I am using wonderware Intouch Window maker 9.0 and I am setting up screens for PID loops.
Specifically the PLC is a Modicon that I programmed with Concept. I utilized the PID1 block and through Wonderware I want to be able to change the P-I-D values.
There is no problem with the P value Proportional (Reset) its a REAL number. So i was able to utilize the analog Tagname wizard...
The I (integral) and D (derivative) values are in TIME values in the PLC. So in wonderware I cannot use the analog tag wizard for the I and D values.
I tried the TouchLink > User Inputs > Discrete but I don't get a keypad or a input popup....
Anyone experience the same issue? Whats the best way to get around this?
Thanks In advance
I am using wonderware Intouch Window maker 9.0 and I am setting up screens for PID loops.
Specifically the PLC is a Modicon that I programmed with Concept. I utilized the PID1 block and through Wonderware I want to be able to change the P-I-D values.
There is no problem with the P value Proportional (Reset) its a REAL number. So i was able to utilize the analog Tagname wizard...
The I (integral) and D (derivative) values are in TIME values in the PLC. So in wonderware I cannot use the analog tag wizard for the I and D values.
I tried the TouchLink > User Inputs > Discrete but I don't get a keypad or a input popup....
Anyone experience the same issue? Whats the best way to get around this?
Thanks In advance