CJ1M CPU11 and NT11 of Omron

huynt

Member
huynt
Join Date
Nov 2004
Posts
106
Dear all.
We plant to use some NT11 programable terminals connect with one CJ1M PLC.
I dont know number of NT11 can connect with one CJ1M use 1:N NT Link.
If I use RS232C port for NT link, peripheral port can use as non protocol port?. This port connect with PC and I write a program use VB6.0 collect data from CJ1M PLC.
Thanks
 

Similar Topics

A
Omron cj1m ETN cpu11 connection with NT631C
Hi dear . I have a system with cj1m cpu11 etn. previously NT 5z HMI was connected with plc. recently my old HMI got damaged. I want to replace it...
Replies
5
Views
75
IO_Rack
IO_Rack
A
Omron CJ1M CPU11 ETN
hi dear all hope you all are fine I have a problem with my CJ1M cpu11 ETN. it stop communication with PC over ethernet. ETN unit all indications...
Replies
4
Views
150
Nafir
N
A
OMRON CJ1M CPU11 Program Upload
Hello everyone. I am new when it comes to Omron PLCs. Currently I'm uploading program from CJ1M PLC using CS1W-CIF31 cable only. I connected the...
Replies
2
Views
134
AndrewThu129
A
M
Omron CJ1M CPU11 Error that appears when i connect via serial port
Hello, I have PLC Omron CJ1M/CPU11, the problem is whenever i connect the PLC to my PC (laptop) via serial port and try to go direct...
Replies
0
Views
2,446
Msobh
M
F
Omron CJ1M CPU11
Hey, new to Omron. I have a CJ1M CPU11 PLC that I need to connect to and backup. When I look up Omron programming software, I find three different...
Replies
1
Views
1,677
BITS N BYTES
B
Back
Top Bottom