Hi Guys,
Anyone ever try to connect PLC Telemecanique TSX7 with CPU PMX 87-455 and HMI Siemens OP17?
or some work that similar to connect between 'old' PLC Telemecanique TSX7 and Siemens HMI (any tipe similar OP17 and TD17)?
In Siemens Software "Protool/Pro" manual is mentioned that Siemens Panel HMI (e.g. OP17) supports Uni-Telway bus.
If we choose the Uni Telway bus at software "Protool", there will be choices of many different kind of Telemecanique Uni Telway driver that can be uploaded to Siemens HMI-OP17 (so that OP17 has a native driver of this CPU):
- TSX SCG 1161
- TSX7 with P47 411
- TSX7 with P.. 420
- TSX7 with P.. 425
- TSX7 SCM 21.6 K. 1
- TSX37 / 57
However, I did not find Telemecanique TSX7 with CPU PMX 87-455.
Please help me if you have some experience on it.
Thanks.
Kwik
Anyone ever try to connect PLC Telemecanique TSX7 with CPU PMX 87-455 and HMI Siemens OP17?
or some work that similar to connect between 'old' PLC Telemecanique TSX7 and Siemens HMI (any tipe similar OP17 and TD17)?
In Siemens Software "Protool/Pro" manual is mentioned that Siemens Panel HMI (e.g. OP17) supports Uni-Telway bus.
If we choose the Uni Telway bus at software "Protool", there will be choices of many different kind of Telemecanique Uni Telway driver that can be uploaded to Siemens HMI-OP17 (so that OP17 has a native driver of this CPU):
- TSX SCG 1161
- TSX7 with P47 411
- TSX7 with P.. 420
- TSX7 with P.. 425
- TSX7 SCM 21.6 K. 1
- TSX37 / 57
However, I did not find Telemecanique TSX7 with CPU PMX 87-455.
Please help me if you have some experience on it.
Thanks.
Kwik