vinitch
Member
Dear All,
Here is my hardwrae list for devicenet application :
1) Main panel with -
SLC hardware with two chasis 13 slot & 4 slot
Processor - SLC 5/05
Devicenet Adapter in slot 3 , Chaisis no. 2 (4 slot)
SPANG thyristor drive is on Devicenet in main panel.
2) Digital IO's in another panel with
1794-ADN devicenet adapter - 1 no.
1794-IB16 - 1 no.
1794-OB16 - 1 no.
I am very much new to devicenet concept.
Will anybody please let me know the required steps to configure
these devicenet adapters and how to get readings/status into PLC ?
I dont have Rsnetworks with me.
Will the demo version work as it can take care of node 0-5 (Total 6) ?
My application is for only two nodes,one is SPANG drive & other is FLEX IO.
A step by step instruction will help to configure devicenet adapters and make mapping in SLC program to read/write values from IO's.
Thanks in advance.
Regards.
Vinit.
Here is my hardwrae list for devicenet application :
1) Main panel with -
SLC hardware with two chasis 13 slot & 4 slot
Processor - SLC 5/05
Devicenet Adapter in slot 3 , Chaisis no. 2 (4 slot)
SPANG thyristor drive is on Devicenet in main panel.
2) Digital IO's in another panel with
1794-ADN devicenet adapter - 1 no.
1794-IB16 - 1 no.
1794-OB16 - 1 no.
I am very much new to devicenet concept.
Will anybody please let me know the required steps to configure
these devicenet adapters and how to get readings/status into PLC ?
I dont have Rsnetworks with me.
Will the demo version work as it can take care of node 0-5 (Total 6) ?
My application is for only two nodes,one is SPANG drive & other is FLEX IO.
A step by step instruction will help to configure devicenet adapters and make mapping in SLC program to read/write values from IO's.
Thanks in advance.
Regards.
Vinit.