HoldenC
Member
We have a controllogix setup with 3 racks, and 14 racks of PLC5 using RIO cards.
Here is my question.
One of the PLC5 racks has a analog output card that isnt being used, and isnt listed in the hardware tree inside of Rslogix 5000. When I right click to add a new module the option is grayed out.
Im still green at all of this. Any suggestions will be greatly appreciated.
Here is my question.
One of the PLC5 racks has a analog output card that isnt being used, and isnt listed in the hardware tree inside of Rslogix 5000. When I right click to add a new module the option is grayed out.
Im still green at all of this. Any suggestions will be greatly appreciated.