FYI. Contrologix V20.19, V20.57, V20.58 kills Kapware - PLCS.net

harryting · April 8th, 2021, 12:33 PM

This is the second time I ran into this. Really stumped me the first time and I had to flash a process back to V19. Only found this KB article yesterday.

https://www.kepware.com/en-us/suppor...otocol-modes/#

I did a search and didn't find anything so I thought someone might benefit from this.

drforsythe · April 8th, 2021, 02:29 PM

Thank you for posting this info, it is very helpful. I ran into this as well. I updated the firmware in a machine and our OSI PI pages stopped working. My co-worker told me about the issue.

Mispeld · April 9th, 2021, 08:07 AM

+1 on the thank you

April 8th, 2021, 12:33 PM	#1
harryting Lifetime Supporting Member Join Date: May 2002 Location: Puget Sound Posts: 2,323	FYI. Contrologix V20.19, V20.57, V20.58 kills Kapware This is the second time I ran into this. Really stumped me the first time and I had to flash a process back to V19. Only found this KB article yesterday. https://www.kepware.com/en-us/suppor...otocol-modes/# I did a search and didn't find anything so I thought someone might benefit from this.

April 9th, 2021, 08:07 AM	#3
Mispeld Member Join Date: Feb 2017 Location: VA Posts: 537	+1 on the thank you __________________ "The greatest enemy of knowledge is not ignorance, it is the illusion of knowledge." -Stephen Hawking

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
*Try our online PLC Simulator- FREE. Click here now to try it.*

April 8th, 2021, 02:29 PM	#2
drforsythe Member Join Date: Aug 2016 Location: Metro Detroit, Michigan Posts: 146	Thank you for posting this info, it is very helpful. I ran into this as well. I updated the firmware in a machine and our OSI PI pages stopped working. My co-worker told me about the issue.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)