Hi,
I have problem with my panel view. This is my setup:
-Panel View 550
-SLC 5/03
I'm using Rslogix 500 v5.20 and Panelbuider32 v3.80 to make my programs.
I've about 30 screens in my PV and I'm using piloted control list selector in about 10 of them.But now, I have a problem. When I want to make a choice in my piloted list, errors occur. This is what appear first on the panel view screen when I go down or up with the arrows:
Minor Fault: 2003
A fault has occured. Error = 514 1
Press any key...
When I pressed a key, everything seem okay. But if I pressed again on one of the up/down arrow to go up/down in the same list, an other error occur:
Minor Fault: 2003
A fault has occured. Error = 511 253
Press any key...
After this, I can't do anything with this control list. When I make a reset, the problem sometimes dissapear for some piloted list. But it's a random problem, I mean sometimes it's a piloted list in a screen who's working wrong, sometimes it's another list in an other screen. I made a lot of a test and it's weird . I'm not able to resolve it and I have to. Could you help me please?
Thank you!!!
I have problem with my panel view. This is my setup:
-Panel View 550
-SLC 5/03
I'm using Rslogix 500 v5.20 and Panelbuider32 v3.80 to make my programs.
I've about 30 screens in my PV and I'm using piloted control list selector in about 10 of them.But now, I have a problem. When I want to make a choice in my piloted list, errors occur. This is what appear first on the panel view screen when I go down or up with the arrows:
Minor Fault: 2003
A fault has occured. Error = 514 1
Press any key...
When I pressed a key, everything seem okay. But if I pressed again on one of the up/down arrow to go up/down in the same list, an other error occur:
Minor Fault: 2003
A fault has occured. Error = 511 253
Press any key...
After this, I can't do anything with this control list. When I make a reset, the problem sometimes dissapear for some piloted list. But it's a random problem, I mean sometimes it's a piloted list in a screen who's working wrong, sometimes it's another list in an other screen. I made a lot of a test and it's weird . I'm not able to resolve it and I have to. Could you help me please?
Thank you!!!