Hamzabenz Member H Join Date Nov 2018 Location Istanbul Posts 1 Nov 7, 2018 #1 Hello, I have a drive allen bradley powerflex70 that works normal it shows that it has start and frequency variation but there is no output 0 voltage, according to you what is the problem thank you
Hello, I have a drive allen bradley powerflex70 that works normal it shows that it has start and frequency variation but there is no output 0 voltage, according to you what is the problem thank you
JeremyGranado Member J Join Date Nov 2018 Location Georgia Posts 8 Nov 8, 2018 #2 If you have a frequency command and run command and its not working, then Id say ya have a bad drive
jstolaruk Lifetime Supporting Member J Join Date Dec 2004 Location Detroit, SE Michigan Posts 3,907 Nov 8, 2018 #3 JeremyGranado said: If you have a frequency command and run command and its not working, then Id say ya have a bad drive Click to expand... Unless it has the safe-torque off option in which case you'll have no output unless the safety inputs are driven ON.
JeremyGranado said: If you have a frequency command and run command and its not working, then Id say ya have a bad drive Click to expand... Unless it has the safe-torque off option in which case you'll have no output unless the safety inputs are driven ON.