Wrong firmware version of PVP6 detected on Factorytalk Linx

astar

Member
A
Join Date
Nov 2014
Location
Singapore
Posts
2
I have PVP 6 (2711P-T10C4D8) with firmware 8.10.45 and Studio 8.10.00. When I checked the firmware on Factorytalk Linx, it displayed as v3.150 instead of v8.10. From the Firmware Upgrade Wizard and from the terminal, the firmware displayed is v8.10.

I have applied the latest patch for FTV ME Jan2021.
Also, installed the EDS for PVP 6 (700-1500) but only major version 3 is available for the catalog 2711P-T10C4D8.

Any idea how to correct the firmware version of PVP 6 displayed on the Factorytalk Linx?
 

Similar Topics

L
Possibly wrong firmware? PV600
I recently went to install a new PV at one of our machines. Backstory Old PV Part number 2711-T6C16L1 SER (B) REV (C) FRN (4.43) New PV...
2
Replies
28
Views
4,912
Leukic
L
J
Is there anything inherently wrong with doing latching like this?
I am latching and unlatching "result_Data_latch" bit within same rung. Will This copy/move instruction execute correctly??
Replies
4
Views
177
drbitboy
drbitboy
P
Factory Talk SE quad monitor closing the wrong header screen when navigating screens
We have a quad monitor setup with FT SE and we are utilizing a header screen at the top of every display. when we open a new page we abort the...
Replies
0
Views
88
Pjohnny17
P
E
Wrong Display Size
Hi all, I am having an issue with FT View Studio ME when I try to open the propoerties of any object, the size of it is very big and doesn't let...
Replies
0
Views
101
estebangza97
E
M
ewrong project path
ewrong aka the censored brand of remote access this thing is kicking my butt and im not sure if i am just irritated enough that i am missing...
Replies
5
Views
624
dmroeder
dmroeder
Back
Top Bottom