SYED.ABIDI
Member
Dear Experts and Friends,
I am trying to read sensor's readings from a CSV file on the same PC which is running WinCC. That CSV file is continuously being updated by another application. I am able to read the CSV file's cell that is holding the sensor's reading which is continuously updated. I took help from this link to read the CSV file's cell
https://support.automation.siemens....objaction=csview&extranet=standard&viewreg=WW
Now the problem is I have to click the read value button every time to see the updated value from the sensor. Is it possible to automate such that I don't have to press the read value button and can see the value update in WinCC.
Thanks
Khyzer
I am trying to read sensor's readings from a CSV file on the same PC which is running WinCC. That CSV file is continuously being updated by another application. I am able to read the CSV file's cell that is holding the sensor's reading which is continuously updated. I took help from this link to read the CSV file's cell
https://support.automation.siemens....objaction=csview&extranet=standard&viewreg=WW
Now the problem is I have to click the read value button every time to see the updated value from the sensor. Is it possible to automate such that I don't have to press the read value button and can see the value update in WinCC.
Thanks
Khyzer
