Dear friends,
This is to seek support regarding a problem we are facing we have elau max4 installed in one of our packing machine since the device is obsolete we decided to arrange a spare for that but came to know that only refurbished one are available in the market, we went for it, bit to our disappointment when we installed it in the machine we are facing an unusual problem i.e. max 4 is not displaying an err all err lights(buserrr,err) are off but the peripheral wago module is not communicating with the max 4 whereas the same wago is communicating with old max4 negating the fact that there can be any problem in wago devices the communication protocol is can layer can you guys help me in identifying the cause of problem
This is to seek support regarding a problem we are facing we have elau max4 installed in one of our packing machine since the device is obsolete we decided to arrange a spare for that but came to know that only refurbished one are available in the market, we went for it, bit to our disappointment when we installed it in the machine we are facing an unusual problem i.e. max 4 is not displaying an err all err lights(buserrr,err) are off but the peripheral wago module is not communicating with the max 4 whereas the same wago is communicating with old max4 negating the fact that there can be any problem in wago devices the communication protocol is can layer can you guys help me in identifying the cause of problem