Communication btw Studio 5000 View Designer with 5000 Studio Logix Emulate

Join Date
Apr 2020
Location
Belgium
Posts
6
Dear Network,
I created a simple program with 3 tags In1, In2 and Out (if In1 and In2 then out) and I downloaded it to my Emulogix 5868 (I'm using Studio 5000 logix designer V32 and Studio 5000 logix emulate) . I created a display with Studio 5000 View designer an added a Numeric display to show the value of the tag "Out". Since I donc have an HMI I used the emulator of the Studio 5000 View designer. when I run the application the Numeric display become Red showing an error "BAN Controller Status Indicator Not Supported on Windows" "Enable to reach the controller emulate"
Thanks in Advance for your support.

Capture.PNG error.jpg
 

Similar Topics

EDIT: The CPU is a PLC5 5/60, we are programming with RsLogix5 Dear PLCTalkers, I'm currently at a customer (for a different project but i like...
Replies
3
Views
4,892
we have the sytem in which a lot of PLC 5/80E, 5/40E,SLC 5/05 etc are connected thru ethernet to HP-alpha server. Now the server has been updated...
Replies
10
Views
4,821
Hello, I need to access the bits from the fire system control panel through RS-485. So, I used Read Var block to read from the panel...
Replies
0
Views
16
Hello all, I am currently trying to establish a message instruction to pass data from a 1756-L73 to a 1756-L71. My communication path from the...
Replies
5
Views
91
I have a CNC cutting equipment, all the components are Fanuc from the CNC CPU A02B-0307-B822, a PLC AIF01A and a panel i, on the panel i (operator...
Replies
1
Views
45
Back
Top Bottom