OT: Searching for Okuma Encoder cable

Good afternoon all, I'm searching for this style encoder cable that goes from an Okuma motor to Okuma drive. Unfortunately, Okuma does not make anymore. Does anyone know where I can find or make one from? See pictures. Goes from a MIV0404A-1-B5 drive into a BL-motor BL-ME80J-40TB; right angle or straight is fine, need about 7-10 meter length if possible.

Thanks,

A little pricey but looks to be what you're after.

https://spwindustrial.com/okuma-3-p...30-ft-long-with-90-degree-circular-connector/

It is same as Mitsubishi on side of drive and it should be Molex. From the side of motor it looks like it is Amphenol or Souriau.