Omron b7as-t6b1 and b7as-r6b31 modules

Killercal

Member
Join Date
Aug 2006
Location
Ontario
Posts
150
Hello all,

A customer has asked us to connect Input/Output blocks to their CC-Link network and have supplied the above modules. I've never worked with these and after doing a quick search it looks like these are not CC-Link compatible.

Has anyone worked with these and can they confirm that they will not work on CC-Link.

Thanks
 
No know anything regarding these?

The customer is saying they had these connected to CC-Link, but I'm not sure there are any switches to set an address, therefor not being able to work.

Any help would be appreciated.

Thanks.
 

Similar Topics

I have an old plc in the system I have, moxa nport was used to communicate with scada, I want to replace the plc with cj2m cpu33 and eliminate...
Replies
1
Views
44
Hi all, i have 8 CJ2m plc units that show different numbers on the plc display and i am stuck on reading the info. my unit has an ip address of...
Replies
3
Views
65
Hi all, Currently having trouble getting a speed reference to write over modbus to an Omron M1... I can successfully write a run command and...
Replies
6
Views
239
Hi There, I have couple of Omron PLCs connected on my kepserverex and my intouch reads data from kepserverex. I have been observing that roughly...
Replies
4
Views
130
Hi dear . I have a system with cj1m cpu11 etn. previously NT 5z HMI was connected with plc. recently my old HMI got damaged. I want to replace it...
Replies
12
Views
244
Back
Top Bottom