Parker eurotherm SSD 637 servo drive software

tvgids

Member
T
Join Date
Nov 2021
Location
in a house.
Posts
1
Dear all,

we have a couple of SSD 637 servo drives that need to communicate trough easyrider. On the parker website you can download easyrider V8.49. But this version is not working with the older FW versions. Does anyone have a easyrider version 5.x as mentioned in the manuals?

thanks in advance.
 

Similar Topics

C
Update old Parker TS80xx HMIs to use Crimson programs?
Has anyone found a way to convert/replace/update the firmware on old Parker TS80xx series HMIs (i.e. TS8010, TS8006, etc) to accept Crimson...
Replies
0
Views
88
CageFreeBMW
C
S
Communication of Parker SSD 590+
Hy everyone, I have Parker DC Drive (590+). in ints manual there is mentioned about P3 port which is based on (RS-232) communication. I want to...
Replies
0
Views
904
SaadJanjua
S
ronny_resistor
PARKER 6055 LNET and Controllogix
So my distributor convinced me to try this card out instead of the Ethernet I/P card this is for the 690 and 590 drives that allow for...
Replies
3
Views
2,231
ronny_resistor
ronny_resistor
S
pinout for Parker 690+ programming cable?
I need to emergency fabricate a cable to program a Parker 690+ VFD. Part # CM351909 I believe. RJ6 on one end, DB9 on the other. I cannot find the...
Replies
1
Views
2,288
strantor
S
D
CTC Parker HMI Inquiry
Hi, I have an old unit HMI with model PA10T-133 (PA Powerstations series). 1. I just have an inquiry whether which particular software to use...
Replies
1
Views
1,820
gclshortt
gclshortt
Back
Top Bottom