Keyence XG-X2200 Simulator

Good Day guys I'm new to this forum,
I have an XG-X2200 system and 2 cameras CA-HX200C.
For example When I try to use a characterize of Vision Tool >> Area.
Can I select but when I try to record an image in Registered Image I failed.
I storage the image on the respective carpet for a camera but don't work.


https://imgur.com/a/TnQcg


Comments or improvement proposals are more than welcome.

Did you register the captured image in step 1? You should be able to toggle between your captured image and your registered image.

baref00t25 said:

Did you register the captured image in step 1? You should be able to toggle between your captured image and your registered image.

Click to expand...

Thanks, The solve was that when select a picture to Register need press a button Save.