Hi Sengle,
I'm late for the discussion but I think you would save a lot of time with S7-1200. It's by far more cappable and the LOGO programming software it is dificult to use for complex logic.
Also fo S7-1200 there is the Library of General Functios available that can be downloaded from https://support.industry.siemens.com/cs/ww/en/view/109479728. It is free of charge but needs to be registered. This library includes many usefull functios like Non Linear Interpolation, Limitation of rate of limit, temperature conversions, signal generators.
Best regards,
Kelkoon
I'm late for the discussion but I think you would save a lot of time with S7-1200. It's by far more cappable and the LOGO programming software it is dificult to use for complex logic.
Also fo S7-1200 there is the Library of General Functios available that can be downloaded from https://support.industry.siemens.com/cs/ww/en/view/109479728. It is free of charge but needs to be registered. This library includes many usefull functios like Non Linear Interpolation, Limitation of rate of limit, temperature conversions, signal generators.
Best regards,
Kelkoon