S5 6ES5941-7UA12 PLC with HMI(PC based or others)

Engrtalha

Member
Join Date
May 2016
Location
Pakistan
Posts
18
Dear Members,

I am new to S5 series PLC, In one of my application, I need to communicate S5 6ES5942-7UA12/ or S5 6ES5941-7UA12 PLC with HMI(PC based or others), Please suggest Hardware and Software for visualization (PC based or HMI) and essentials to build a connection.



Best Regards
 
Please suggest Hardware and Software for visualization (PC based or HMI) and essentials to build a connection.

I dont know about your HMI but for the PLC you will need a TTY cable and Step5 software, there are aftermarket versions that I like better then the Siemens (S5 for Windows) https://www.ibhsoftec.com/S57W-Eng

I would also suggest this is a great time to upgrade your system because they stopped making them about 20 years ago
 
Hi,
Thank you for your support.HMI would be PC based WinCC flexible RT. Originally the system was running on PLC station only but now the client asks to add HMI for visualization.
 
The converter I suggested can be used for programming with IBH-S5W, and it supports S7-protocols as Put/Get, which is much more common on modern HMI systems than the cheaper cable and AS511 protocol.

Kalle
 

Similar Topics

Apologies for not being the best IDEC programmer. I recently was doing some inspections on a site that had 3 FC6A IDEC processors. The issue is...
Replies
0
Views
36
"Hello! Good day! Excuse me, I have a question regarding the 1761-NET-ENI. RSLinx has already detected it but it's not connecting to the PLC...
Replies
4
Views
60
How to fix if appears code “$115 plc-restart running” on the screen OP17
Replies
3
Views
91
Good morning fellow sea captains and wizards, I am being asked to do the above and obtain 4 values from each slave, I know about the MRX and MWX...
Replies
20
Views
201
HI i would like to know how to get a variable that will store the amount of times a program has been executed. The issue is I have 3 DBs for 1 FB...
Replies
2
Views
58
Back
Top Bottom