PowerFlex 525 Ethernet

makr8100

Member
Join Date
Jan 2018
Location
USA
Posts
31
Hi guys,

I'm trying to control a PowerFlex 525 from a 3rd party controller over ethernet, i.e.- without RSLogix 5000. I can't find any documentation on supported protocols, protocol configs, or register addressing. In the manual it shows DF1/Modbus register addressing but nothing for ethernet. Anyone know of such a manual?


Thanks
 
Hi guys,

I'm trying to control a PowerFlex 525 from a 3rd party controller over ethernet, i.e.- without RSLogix 5000. I can't find any documentation on supported protocols, protocol configs, or register addressing. In the manual it shows DF1/Modbus register addressing but nothing for ethernet. Anyone know of such a manual?


Thanks

PowerFlex 525 Embedded EtherNet/IP Adapter User Manual

See 'Using Logic Command/Status', page 62 and Appendix D, page 153.
 

Similar Topics

Hi guys! We have a big project at work where we are migrating from 1305, 1336, 160, 70, and 40 drives to identical PowerFlex 525 models. Most...
Replies
3
Views
839
Hi All, I am working on testing a project with a Powerflex 525, final project will be a 755, and I am trying to reset the Elapsed kWh meter over...
Replies
3
Views
561
I am looking for some help with a project that I am working on to finish my maintenance apprenticeship. Any help would be greatly appreciated. My...
Replies
7
Views
3,157
Good Morning , I have a quick question about the Powerflex 525 embedded ethernet drive. I'm using a CompactLogix 1769-L18 and using Ethernet...
Replies
2
Views
1,720
Good Day Guys, I currently have a set up with 4 pieces of a 22-comm-e with 20 powerflex 4. I would like to move away from the daisy chain...
Replies
6
Views
2,440
Back
Top Bottom