NintendoPlayer
Member
Hi!
I have a customer with a SLC5/03 and a PanelView 550. I need to extract the application from the PanelView 550, but this model only has two DH485 ports, one RJ45, and a propietary connector, like a wider RJ45.
he SLC5/03 has a RJ45 and a DB9. RJ45 is used to communicate to the PanelView.
I've been looking for a 1747-UIC for extracting the application directly, but it's been Mission: Impossible, no one has it.
I've been reading about connection with my PC to DB9 with a serial cable, and then configure the SLC to passthrough communication to PanelView, but I don't exactly know how to do this.
Could someone explain me how to do this, or how I can extract the application from the PanelView with my setup?
I repeat, only RJ45 and propietary connector on PanelView side.
Thank you all!
I have a customer with a SLC5/03 and a PanelView 550. I need to extract the application from the PanelView 550, but this model only has two DH485 ports, one RJ45, and a propietary connector, like a wider RJ45.
he SLC5/03 has a RJ45 and a DB9. RJ45 is used to communicate to the PanelView.
I've been looking for a 1747-UIC for extracting the application directly, but it's been Mission: Impossible, no one has it.
I've been reading about connection with my PC to DB9 with a serial cable, and then configure the SLC to passthrough communication to PanelView, but I don't exactly know how to do this.
Could someone explain me how to do this, or how I can extract the application from the PanelView with my setup?
I repeat, only RJ45 and propietary connector on PanelView side.
Thank you all!