Micro memory card of s7-300plc

nibay

Member
N
Join Date
Jul 2009
Location
delhi
Posts
42
Ihave facing some problem in mmc card
1) my mmc card is found password protected.and iam put it in mmc Card reder and formet it after then when we put this card in plc AND DOWN LODE SOME PROGRAM
the plc is not communicate with pc.and massage shown (no on line patner found).
but when we put the other mmc card the plc is communicat with pc perfectaly.
:sleep::sleep::sleep::sleep:

kindly help me.
 
You've b_uggered the MMC when you formatted it..

Read Petr's (tischer) contributions in THIS thread.. (or just skip straight to post #69)

Search is your friend.......
 

Similar Topics

mad4x4
S7 Micro Memory Card - Emailing
1) Can I check if the project is stored on a MMC card with a Standard Laptop & Card Reader 2) Do I need a PLC to create a project on the MMC...
Replies
4
Views
1,885
gclshortt
gclshortt
J
Siemens Micro Memory card
Guys Good morning, I have a question regarding Siemens micro memory card. First i need to clarify my doubt why we use this micro memory card...
Replies
3
Views
5,817
jamalshahid
J
J
siemens micro memory card
I have little unclear how this Siemens memory works. For now i have problem that my load memory (mmc) is over 80% full so i have to upgrade it to...
Replies
3
Views
2,377
JesperMP
JesperMP
M
conecting MICRO MEMORY CARD to plc
dear friend we bought a SIMATIC S7, MICRO MEMORY CARD F. S7-300/C7/ET 200S IM151 CPU, 3.3 V NFLASH, 64 KBYTES (6ES7953-8LF11-0AA0) for cpu...
Replies
1
Views
6,263
StanleyZhou
S
id10t_error
1762 Micro logix 1200 Ver.C Memory Type?
What type of internal memory does the MicroLogix 1200 Ver.C have? In the documentation, there is only an internal non-removable battery for the...
Replies
1
Views
1,570
rupej
R
Back
Top Bottom