AT366
Member
Hi, I'm using CX Programmer and just seeing what the best way to trigger an output from the plc clock time would be. I need this to come on at 9am every morning just to send a signal for about 2minutes.
thanks
thanks
Omron. PLC Clock to trigger output
- Thread starter AT366
- Start date
drbitboy
Lifetime Supporting Member
BITS N BYTES
Lifetime Supporting Member
You can use the Time Comparison Instructions type DT.
Use >=DT 9.00 AND <=DT 9.02
Use >=DT 9.00 AND <=DT 9.02
BITS N BYTES
Lifetime Supporting Member
Example attached
BITS N BYTES
Lifetime Supporting Member
First MOV should be #0038 -> D300
Similar Topics
Im using Omron CPM1A plc. is there a build in clock that i can call everytime i need to log a certain incident? If not can someone send me a...
Hi There,
I have couple of Omron PLCs connected on my kepserverex and my intouch reads data from kepserverex. I have been observing that roughly...
I am working on a project using a NB screen and NX1P2 PLC.
I am having a really hard time getting a real number to properly translate through to...
Our plant manger/my boss wants each line to display the takt time above the line. I am trying to research the cheapest way to do this. Our plant...
I have PLC Omron CJ2M with OD211 module. I want to use the pulse output and PWM output and this module. But i confuse how to activated this, i...