cottagewood
Member
I'm putting together a system with a Redundant S7-1500 CPU and 2 Comfort HMI’s on an MRP ring.
The HMI’s will be doing the same job and only one person should be on the site operating them.
Is it possible to set them up as a master and slave?
The things I would like to achieve:
1.Logging into one HMI would automatically log the other one off
2.If a user is created at runtime on one HMI, it would also be available on the second HMI
3.The event logs/audit trail would match, but in the event of a failure of one HMI the 2nd one can still display the log
The HMI’s will be doing the same job and only one person should be on the site operating them.
Is it possible to set them up as a master and slave?
The things I would like to achieve:
1.Logging into one HMI would automatically log the other one off
2.If a user is created at runtime on one HMI, it would also be available on the second HMI
3.The event logs/audit trail would match, but in the event of a failure of one HMI the 2nd one can still display the log