B&R Automation Studio V3

jeddoo

Member
J
Join Date
Jan 2021
Location
uae
Posts
2
In Automation Studio V3 when try to Open Project from target.. (4PP220.1505-B5), I have a message "No valid Automation Studio project file !"
What that means?
 

Similar Topics

M
Command over Ethernet/IP (Sysmac Studio and Automation direct GS20)
Hi, I have been trying to run drive via Sysmac studio. I can ping the drive. I can see the logic bits going on/off as per command. But, drive is...
2
Replies
21
Views
563
tarik1978
T
D
B&R Automation Studio X20CP1484-1 with ABB VFD
Hello Experts, I recently stumbled with an issue about ABB VFD ACS800 connected with B&R PLC X20CP1484-1. This ABB VFD ACS800 somehow got...
Replies
0
Views
323
DenZ_P
D
A
Automation Studio V3.0.90 Visualization project to HMI
Hi, I would like to prepare a project for the operator panel and I do it like this: New project -> I choose the appropriate panel -> add object ->...
Replies
0
Views
426
aress124
A
A
Automation Studio 2.7.0 Visualization project to HMI
Hi, I would like to prepare a project for the operator panel and I do it like this: New project -> I choose the appropriate panel, it seems to me...
Replies
3
Views
635
parky
P
afm
Automation Studio: Store sensor values for 5 seconds and extract minimum value
Hi all, I am working with an IO link sensor (measuring current across motor)and need to read in and store the sensor values for 5 seconds, then...
Replies
13
Views
1,208
drbitboy
drbitboy
Back
Top Bottom