I have a Goulds water pump skid running the Xylem e-MT controller. This controller has a modbus TCP/IP interface.
I have configured the service screen for the IP that sets the modbus interface.
I cannot make a connection to it via Modscan32...I have tried all memory areas in the documentation and I cannot get a connection. Currently their tech support is not answering calls (for 2 days now).
Any help / experience on this?
[all I can do on the xylem side is set an IP address and reboot it. cannot check the port or anything else.]
Thanks in advance.
I have configured the service screen for the IP that sets the modbus interface.
I cannot make a connection to it via Modscan32...I have tried all memory areas in the documentation and I cannot get a connection. Currently their tech support is not answering calls (for 2 days now).
Any help / experience on this?
[all I can do on the xylem side is set an IP address and reboot it. cannot check the port or anything else.]
Thanks in advance.