Reset P0251 parameter in sinamics G150

mehdir

Member
M
Join Date
Sep 2012
Location
naien
Posts
11
Hi Dear
i have A30042 alarm on sinamics G150 and i know that must to set P0251=0.
but in parameter list in all access level on AOP30 and in starter software in PC after uploading parameters, P0251 & P0252 dont exist(not seen). what do i do to activate thease parameters?
berst regards
 

Similar Topics

D
Reset PLC Horner?
I was loading a program onto an XE1e2 PLC and it got stuck on these two windows and won't progress. It won't let me connect from the PC to reload...
Replies
0
Views
61
Data_name
D
moistcat
Factory Reset 4RF Aprisa SR+
Hi all, i have recieved some 4RF Aprisa SR+ ethernet radios from a customer to configure. Issue is that they are used and have non-default...
Replies
0
Views
61
moistcat
moistcat
id10t_error
1769-L24-QBFCB1 Embedded Counter Fault Reset (OK Light Flashing)
Hi Guys, I have a 1769-L24-QBFCB1 that has the OK light flashing on the embedded counter module. The manual states it is a resettable fault, but...
Replies
0
Views
98
id10t_error
id10t_error
G
Data log time is reset in HMI
We are using RED LION HMI Since las 15 years. To day we have found that My log file has data up to 22 Mar 2024 1:16. Then After new Log File is...
2
Replies
22
Views
1,173
OkiePC
OkiePC
R
Reset Module inside AOI
I'd like you to meet my IO_Link Block, Fred. There are a couple of SSVs outside of Fred's AOI whose main purpose in life is to prevent me from...
Replies
2
Views
140
RetiQlum
R
Back
Top Bottom