RSView32 Alarm Banner won't pop up

jkaneko

Member
Join Date
Jul 2010
Location
In a house
Posts
7
Alarm Banner won't pop up?

Anyone know as to why?

Communicating thru DH+ PLC5

It's pointing to the correct processor name.
Tag is set correctly in the Database. All spellings and spaces are correct.
Event is also setup correctly.
Tried using another bit in the data table, but still the same.
It works with another processor that is connected thru ethernet.

Your help is greatly appreciated.
Thank you,
 

Similar Topics

Does anyone out there know as to why my alarm banner does not pop up? Interfaced with PLC5 thru DH+ and pointing to the correct processor. All...
Replies
5
Views
3,859
iam using rsview32 for SLC500/5 processor.we have 9 motors to control in the process.suppose if motor 6 trips, iam getting alarm as if 7 trips. i...
Replies
8
Views
1,671
Hi, It was brought to my attention today that the alarm log on one of our View32 Projects has not worked in 2 years. I looked at the setup:file...
Replies
5
Views
2,439
hi I feel like this should be easy but i cant figure it out. I want to take my alarm log history and save it to a folder so I can look at later...
Replies
2
Views
1,406
Hi, I followed the instructions on setting up alarm logging but it never explains how to set alarm log to display inside one of my displays...
Replies
0
Views
1,152
Back
Top Bottom