I don't have much experience with a FloBoss107, but I was hoping someone could confirm some details for me.
I understand that out of the box a Floboss107 can handle turbine meters by accepting pulse inputs, but can it handle a 4-20mA volumetric flow signal for use in gas flow compensation?
There is some documentation that seems to state that you need to install a user program from Emerson for linear flow meters in order to utilize a 4-20mA flow signal. I've never worked on one of these before so if anyone can set me straight it would be much appreciated.
I understand that out of the box a Floboss107 can handle turbine meters by accepting pulse inputs, but can it handle a 4-20mA volumetric flow signal for use in gas flow compensation?
There is some documentation that seems to state that you need to install a user program from Emerson for linear flow meters in order to utilize a 4-20mA flow signal. I've never worked on one of these before so if anyone can set me straight it would be much appreciated.
