Help needed to open .stx files

bdauliya

Supporting Member
B
Join Date
Sep 2020
Location
New York
Posts
34
Gentlemen,

I have got a machine which has some .stx files in it (provided by manufacturer). The machine has Schneider TSX3721 PLC.

Please suggest which software to use for this type of files. and what type of cable do I need to go online with this particular controller.


Thanks in Advance.
 

Similar Topics

G
Urgent help needed: old Telemecanique/Modicon/Schneider Electric (TSXP5710). Will compensate anyone who can assist!
I have an old PLC (circa 2007) consisting of Telemecanique/Modicon/Schneider Electric devices. The system has developed errors and unfortunately...
Replies
2
Views
213
greekgremlin
G
S
Siemens tia help needed
Hi I’m after some help , I have a plc program with a baumer verisens vision camera attached I have got the signals working ect but I have an...
Replies
9
Views
954
stu
S
Q
Redundancy Fault - Urgent Help needed
Hi all, We are facing synching issues with redundancy module, where the Primary is ending up with disqualified secondary. Normally this would...
Replies
2
Views
620
Ken Roach
Ken Roach
B
Help Needed with PL7 pro
Hi all, I have got this machine that needs to be up and running soon. This machine has Schneider's Controller and I/O modules, 3 vfd's, 2...
Replies
2
Views
900
Ranjith
R
J
HSC help needed on AB micro 1100
Is it possible to write to the high speed counter function file "high speed preset" on an AB micro 1100. I have the HSC set up with a MOV...
Replies
3
Views
1,080
drbitboy
drbitboy
Back
Top Bottom