Calling out to the OMRON PLC fans,
I am currently programming an Omron CJ2H-CPU66. I am needing to take a previous program from the larger CPU (CJ2H-CPU67) and commissioning it on this CPU66.
I am now experiencing memory allocation issues. Please refer to the attached screenshot (it basically says I have insufficient memory space for the 'FB non-reained' - this inhibits me from compiling the code error-free)
I have a 128MB expansion card on the CPU66. Does anyone know if it is possible to utilize the memory card to act as an extension of the CPU internal memory areas?
I am currently programming an Omron CJ2H-CPU66. I am needing to take a previous program from the larger CPU (CJ2H-CPU67) and commissioning it on this CPU66.
I am now experiencing memory allocation issues. Please refer to the attached screenshot (it basically says I have insufficient memory space for the 'FB non-reained' - this inhibits me from compiling the code error-free)
I have a 128MB expansion card on the CPU66. Does anyone know if it is possible to utilize the memory card to act as an extension of the CPU internal memory areas?