Hello,
In my project work i am Connecting two Allen-Bradley HMIs (PanelView Component C600 and PanelView Component C1000) to Allen-Bradley PLC (Micrologix 1200). As ML1200 doesn't have an Ethernet port i have used 1761-NET-ENI module for DF-1 to Ethernet/IP conversion also in between two HMIs i have incorporated a Switch. I just want to know how can i Configure the IP address of ML1200 through Ethernet module or is it require to configure it ? I have connected Ethernet module to PROG/HMI port instead of COM port (channel 0),Can i use this configuration ? :site:
In my project work i am Connecting two Allen-Bradley HMIs (PanelView Component C600 and PanelView Component C1000) to Allen-Bradley PLC (Micrologix 1200). As ML1200 doesn't have an Ethernet port i have used 1761-NET-ENI module for DF-1 to Ethernet/IP conversion also in between two HMIs i have incorporated a Switch. I just want to know how can i Configure the IP address of ML1200 through Ethernet module or is it require to configure it ? I have connected Ethernet module to PROG/HMI port instead of COM port (channel 0),Can i use this configuration ? :site: