Hi all,
Can someone direct me int o how to calibrate my scale connected to my 1769 analog input 0 - 10 V
input voltage to the card is 1.66VDC
word 1 input range between -10v to 10v filter 60 hz raw/proportional reading value = 5193
word 2 0V to 5 V 50 hz Engineering units = 1
word 3 1 V to 5 V 500 hz scaled for PID = -2048
scale output voltage is 24mv to 1k lb
what command do i need to use in order to calibrate this on the plc?
Thanks
Can someone direct me int o how to calibrate my scale connected to my 1769 analog input 0 - 10 V
input voltage to the card is 1.66VDC
word 1 input range between -10v to 10v filter 60 hz raw/proportional reading value = 5193
word 2 0V to 5 V 50 hz Engineering units = 1
word 3 1 V to 5 V 500 hz scaled for PID = -2048
scale output voltage is 24mv to 1k lb
what command do i need to use in order to calibrate this on the plc?
Thanks