plc

rajeshkumar

Guest
R
hai everybody. this is my first attempt.

i want your help. i want to actuate a simple 3 - axis robot using plc.
Can you help me in this by sending me a ladder logic diagram.

It should have 6 inputs i.e. 3 inputs for actuating 3 solenoid valves and 3 inputs to off them.

Actually the robot is fully made of pneumatics and i am going to control the piston to actuate the robot. In that for circular motion of the robot i use a swing piston.

After reaching a predefined degree of rotation. the solenoid should be automatically switched off.

Please give me suggestions how to do this. Please send me answers quickly as possible. because this is for my project

thankyou


Regards,
Rajeshkumar
 
i want to actuate a simple 3 - axis robot using plc.

Seeing as how this is simple and you need it in a hurry because, I presume, your papers need handing in to the tutor very quickly. Please the rest of you reading this, allow me to send him the full ladder logic with comments, statements and a full explanation of the logic. I dont want him to be in trouble with his tutor for not having his homework in on time.
So rajeshkumar, you just sit by the e mail box and up it will pop, as easy as that.
 

Similar Topics

Hello, I have an automation direct d2 262 plc and C-more HMI EA9T6CL-R. I need to prepare a program, scheduled to be performed on a future date. I...
Replies
1
Views
22
Hello, I'm trying to delve a little into rs-485 communications for a couple projects of mine. Until now I've been using a delta vfd and a delta...
Replies
2
Views
45
Greetings All, I recently decided to start freelancing in Controls and Automation part time, most of my experience has been with Rockwell...
Replies
2
Views
88
I am having a problem communicating my PLC with Drive via Modbus connection. I start by opening the port and there is no problem, but then when I...
Replies
5
Views
56
I have worked on small projects using AB Micrologix but now we want to take a photo, process it online, and sort based on returned variables...
Replies
1
Views
89
Back
Top Bottom