You are not registered yet. Please click here to register!


 
 
plc storereviewsdownloads
This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
 
Try our online PLC Simulator- FREE.  Click here now to try it.

---------->>>>>Get FREE PLC Programming Tips

New Here? Please read this important info!!!


Go Back   PLCS.net - Interactive Q & A > PLCS.net - Interactive Q & A > LIVE PLC Questions And Answers

PLC training tools sale

Reply
 
Thread Tools Display Modes
Old December 7th, 2017, 09:41 AM   #1
grant.dotulong
Member
United States

grant.dotulong is offline
 
Join Date: Dec 2017
Location: Seattle
Posts: 4
Connected Components Workbench Analog Output Programming

Hi all,

I'm having trouble programming the analog output on my Allen Bradley Micro850 with OF4 extension. I enabled the channels, minimum-maximum output range 4-20mA, with the data format in engineering units. I'm trying to control an inverter wired to a motor. I used the MOV instruction block to assign my analog output with values from my analog inputs, but it seems that the analog output does not produce any signals (tried with my multimeter) even though there are values in CCW's live mode. Does anyone have the solution for this?

Thanks,

-Grant
  Reply With Quote
Old December 7th, 2017, 02:05 PM   #2
gclshortt
Member
Canada

gclshortt is offline
 
gclshortt's Avatar
 
Join Date: Dec 2014
Location: Cobourg
Posts: 2,181
http://www.plctalk.net/qanda/showthread.php?t=103739

http://www.plctalk.net/qanda/showthread.php?t=92574

Here are a couple of threads that may help you out.
Regards,
__________________
Garry
http://www.accautomation.ca
Connect with us on Facebook: facebook.com/accautomation/
  Reply With Quote
Reply
Jump to Live PLC Question and Answer Forum

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Topics
Thread Thread Starter Forum Replies Last Post
AB Micro800 and Connected Components Workbench programming question PLCDontUQuitOnMe LIVE PLC Questions And Answers 16 April 26th, 2017 06:02 PM
Omron PLC- CJ1W-DA021 Analog output Programming help required noorloai LIVE PLC Questions And Answers 3 March 16th, 2017 12:06 PM
Connected Components Workbench Slow twocozz LIVE PLC Questions And Answers 3 December 1st, 2016 04:10 PM
Micro810 & Connect Components Workbench - Configuring Analog Input khelza LIVE PLC Questions And Answers 3 June 21st, 2016 07:50 AM
Connected components workbench temperature control avlgeneral LIVE PLC Questions And Answers 1 May 26th, 2016 01:32 AM


All times are GMT -5. The time now is 02:40 PM.


.