Need help on Microsol RTU

raul_vaze

Member
R
Join Date
Feb 2008
Location
mumbai
Posts
87
We have a Compact Logix station whose serial port ( configured as DH-485) is connected to NET-AIC , and the other port is connected to Microsol RTU on Modbus( I was told by persons on site). Microsol RTU is transferring the data over IEC protocol , Now i have to make changes in the RTU as many analog signals are to be added. I have never worked on Microsol RTU so my question are as follows..


. Does any model of Microsol RTU support Modbus on one Port and IEC protocol on other ??

. How to configure the Microsol RTU ??

. Any programming software involved ?? Is it free

Please help me ..as i am very badly stuck here
 

Similar Topics

D
I need help to make a Working Schedule for Make-up Air unit
I'm fairly new to Rockwell software, I've had some basic training in the past but nothing too advanced. My company and I use Reliable products for...
Replies
9
Views
151
padees
P
C
Need Help Accessing/Printing a Program - CIMPLICITY
Hi all, I am having issues accessing my Cimplicity software - the site code changed after re-install and I am no longer able to attain a new key...
Replies
10
Views
135
Steve Bailey
Steve Bailey
E
Need help updating E700 firmware from 2.x to 6.x. Have E700v610.bin file.
Good day all! Can someone help me with the procedure to update Beijers E700 firmware? The Panel I am working on is firmware 2.04v and I would...
Replies
1
Views
56
parky
P
R
I need help
Hi guys
Replies
10
Views
512
I_Automation
I_Automation
P
Need help Converting STL to SCL in TIA v17
Hello nice to meet you, im new in here, I'm currently trying to convert code written in STL for a S7-400 to SCL for an S7-1500, because when i run...
Replies
5
Views
314
JesperMP
JesperMP
Back
Top Bottom