I am trying to set up a simple password to enter into a screen on GT Designer 3. I can set the security level and when I attempt to select the screen. The HMI does ask for a password. When I put in the correct password it will tell me I have input the password successfully. I hit ok, and the X to close the password dialogue box. My password protected screen will pop up for a few seconds but the password dialogue box pops right back up and will not go away. The screen switching is done from the PLC, but I wanted to get others opinions to make sure I don't have something set incorrectly in the HMI before I dig into this.
Mitsubishi HMI question
- Thread starter sjanes9
- Start date
Similar Topics
I am using a GOT1000 HMI and working with a program that is programmed in GT Designer 3 version 1.124E. The problem I am having is dealing with...
Hello,
Can anyone tell me how to change the IP label for a GOT?
I am networking a bunch of GT1665M's and they automatically generate an IP...
Hello all,
I searched through several of pages looking for information on Mitsubishi HMIs but most of the threads were at least six years old. My...
Hi Guys,
Well, I fear that I'm flagellating a dead equine here, but I thought I'd ask anyway.
This is connected to the same machine that I...
hi all i am new here i have a mitsubishi smart touch hmi i.e ms-60t-pe but i cannot find a software to edit and download a program in it any help...