I was about 9/10 done building a new HMI program using both HMI tags and direct reference tags. I was testing it to make sure all of the bugs were worked out of it when one of my screens locked up. I exit out of the application test and when I opened it up again, I quickly realized that all of my HMI tags had quit functioning, but the direct reference tags still worked. I checked the addressing on my HMI tags to make sure that they were still looking at the correct shortcut in linx and they were. I can replace an HMI tag with its direct reference and it will work, but that will take forever. Does anyone have any idea what might have caused this? Thanks in advance...
Last edited: