IFIX4.0 + SLC-500 on XP32bit Upgrade required

chissene

Member
Join Date
Dec 2018
Location
italy
Posts
1
Hello,

i need an advice regarding a quite old system that i would like to upgrade to windows 7 (x86 or x64)

It is a win XP 32bit with an IFIX 4.0 ad-hoc project controlling a single Allen Bradley SLC-500 (which is already discontinued i think) under config/hardware is SLC 5/04, 5/03 OS301. The driver is ABH-Allen-Bradley Data Highway v6.40a.

So the questions are:

1. Ifix 4.0 have WinXP as minimal requirements, but is it compatible with win7 (x86 or x64) ?

2. Let's say that the point 1 is negative and i need to also upgrade IFIX to a newer version, do that driver work with win7 x86 or x64 or i need to find out there another updated driver ?

Thanks
 

Similar Topics

I'm trying to read/write to an SLC5 with a ControlLogix L71 V35 plc that fails. The exact same code works on an L82S with V32. Is there a known...
Replies
9
Views
104
I'm ashamed to admit this but I've never had to replace a battery in a SLC. Some how been able to skip that task in all my years. So yesterday...
Replies
8
Views
216
I have a program that I've used 100 times. SQO settings: File N7:0, Mask 0FFFFh, Dest B3:1, Control R6:0, Length 8, Pos 2. Length & Position...
Replies
48
Views
795
Hello PLC friends. I've been going through a saga of diagnosing and fixing an old PLC setup that I inherited. I am learning as I go. Initial...
Replies
14
Views
298
I had a 5/01 CPU give a CPU Fault. It lost the program and I was not able to establish communication with it. I replaced it with a 5/03 we had in...
Replies
3
Views
111
Back
Top Bottom