We have an issue with the trigger of a scanner (M21.3).
Problem is, I need to convert the code first into a LAD kidna thing because it is too complex to analyse right now.
So far I can see that the first things before the first OR is all manual stuff and that everything behind it is in automatic mode.
But there there are some weird nestings that I cannot convert to LAD at this moment.
This is the code:
Anyone with lots of time who sees how this would look like in LAD ?
Kind regards,
Combo
Problem is, I need to convert the code first into a LAD kidna thing because it is too complex to analyse right now.
So far I can see that the first things before the first OR is all manual stuff and that everything behind it is in automatic mode.
But there there are some weird nestings that I cannot convert to LAD at this moment.
This is the code:
Code:
A "=2+A2 172S6"
A "M 3.6"
AN "I210.4"
AN "=2+A2 171S15"
A "=2+A2 171S11"
AN "=2+A2 171S6"
AN "=2+A2 171S2"
AN "=2+A2 170S15"
A "=2+A2 170S11"
A "=2+A2 170S6"
O(
A(
A(
A "=2+A2 166S6"
A "=2+A2 168S2"
A "=2+A2 165S6"
A "=2+A2 165S11"
O "M 21.3"
)
S "M 21.2"
A(
O "M 21.4"
O "=2+A2 168S6"
)
R "M 21.2"
A "M 21.2"
)
A(
A(
A(
A "70106 SPEED".run_fwd
A "=2+A2 251K11"
A "=2+A2 168S11"
A "=2+A2 257K7"
L S5T#450MS
SD "T21"
NOP 0
NOP 0
NOP 0
A "T21"
)
= "M 21.4"
A "M 21.4"
NOT
)
)
AN "M 3.6"
AN "M 6.0"
)
= "M 21.3"
Anyone with lots of time who sees how this would look like in LAD ?
Kind regards,
Combo