Ge plc

joyc

Member
Join Date
Oct 2019
Location
mozambique
Posts
1
Dear all
we have a GE PLC,GE fanuc varsamax IC200PWR002E . I dont know what is the ip address in this plc. i could not communicate plc by ethernet cable.
so please help me how to i find ip address.
kind regards
joy
 
The part number you gave is for the power supply. The part number for the CPU is actually hidden by the power supply, but at the upper left hand corner of the unit you should see "CPUE05". Is that the case?
There is a utility in Proficy Machine edition software that can set a temporary IP address. You could use that, establish a connection and extract the hardware configuration from the PLC. The hardware configuration will include the details of the actual IP address. The IP address will revert back to the original IP address when you cycle power to the PLC.
 
Dear all
we have a GE PLC,GE fanuc varsamax IC200PWR002E . I dont know what is the ip address in this plc. i could not communicate plc by ethernet cable.
so please help me how to i find ip address.
kind regards
joy

If you hook up WIRESHARK directly to the ethernet port, and power cycle the PLC, it will broadcast its IP address in GARP {Gratituious Address Resolution} protocol.
 

Similar Topics

Hello, im quite new and still learning. I would like to ask is it possible for FATEK PLC to read data value more than 16k? I'm trying to move my...
Replies
0
Views
2
Hi all, looking to model old RR relays in PLC. Does anyone have any SPECIFIC examples on how to model a relay such as a polar relay, slow pickup...
Replies
0
Views
86
HelloI need software to download the program from PLC EH-A28DRP from an old machine whose manufacturer does not exist. It may be Ladder Editor for...
Replies
2
Views
90
HI everyone, i am new to Siemens plc programming and i am in need of some help. yesterday we had an S7-1200 CPU 1214C fail to turn on an output to...
Replies
9
Views
305
Hello, I have a Mitsubishi FX3G 14M PLC and a E615 HMI from Mitsubishi/Beijer. I'm using GXWorks 2 to do the programming and I have no problem...
Replies
4
Views
151
Back
Top Bottom