valley_brent
Member
hi all.
i am trying to use a panelview 300 with keypad (i dont have the part number handy as im on my home computer at the moment).
when i plug the connection wire to the micrologix 1500, the comm light stays solid (as expected) and the fault keeps blinking since there is no program loaded.
i am trying to connect to the panelview with my laptop. there is a built in rs232 port that i plug my straight-through db9 rs232 cable into. I cannot see the panelview in RSLinx and the comm light on the panelview keeps blinking....
i have tried both the null-modem and straight-through...
any help would be appreciated.
i am trying to use a panelview 300 with keypad (i dont have the part number handy as im on my home computer at the moment).
when i plug the connection wire to the micrologix 1500, the comm light stays solid (as expected) and the fault keeps blinking since there is no program loaded.
i am trying to connect to the panelview with my laptop. there is a built in rs232 port that i plug my straight-through db9 rs232 cable into. I cannot see the panelview in RSLinx and the comm light on the panelview keeps blinking....
i have tried both the null-modem and straight-through...
any help would be appreciated.