silentcororo
Member
hi everyone;
I have just started with panelview and communication with ML 1200 DF1 232 comport 1, I made the net configuration appear in the picture, but the rslinxs cant see the Pv and ml1200 DF1, when i set the belden cable with next configuration on pic, the firts aic doesnt blinks the RS485 but the second in there are pv550 and ml1200 rs485, minidin and df1 are blinking
the cable belden is worng or ??
because if i concect the ml1200 to port 1 and pv on port 4 i can see then on rslinx on direrent drivers.
Migul V.
Thanks in advance.
I have just started with panelview and communication with ML 1200 DF1 232 comport 1, I made the net configuration appear in the picture, but the rslinxs cant see the Pv and ml1200 DF1, when i set the belden cable with next configuration on pic, the firts aic doesnt blinks the RS485 but the second in there are pv550 and ml1200 rs485, minidin and df1 are blinking
the cable belden is worng or ??
because if i concect the ml1200 to port 1 and pv on port 4 i can see then on rslinx on direrent drivers.
Migul V.
Thanks in advance.