Help converting Logicmaster file for opening in GE-ME 5.5 - PLCS.net

Robertg01 · February 9th, 2006, 05:27 PM

Hello All and Steve Bailey,

I have attached a Logicmaster file from an old GE 9030. The memory is lost and just bought GE Proficy ME to put it back in but the LM file is too old. If you can open the file and convert it so it can be read with the latest Proficy please email it back to me at robert.grimm@larox.com.au
Sorry to the moderator but the file is a bit bigger than your recommended 50k.

Thanks
Robert

Steve Bailey · February 9th, 2006, 08:43 PM

It was a bit of a struggle, but I managed to get it done. I was unable to get the LM90 files imported into CME. I had to import into VersaPro first and then import the VP folder into CME.

In order to successfully import the LM90 files into VP I had to first download the logic and configuration from LM90 to a PLC and then upload from the PLC to LM90. That process created all the files that VP was looking for during the import.

Robertg01 · February 9th, 2006, 11:34 PM

The folder was able to be restored into CME. Hooray!
I love engineering. I hope I can help others like you do Steve.

February 9th, 2006, 11:34 PM	#3
Robertg01 Member Join Date: Feb 2006 Location: Sydney Posts: 5	Many Thanks to Steve Bailey The folder was able to be restored into CME. Hooray! I love engineering. I hope I can help others like you do Steve.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Topics
Thread	Thread Starter	Forum	Replies	Last Post
converting ladder logic to bin file	stickben	LIVE PLC Questions And Answers	0	October 11th, 2005 03:42 PM
O.T. Converting PRN file to a PDF.	elevmike	LIVE PLC Questions And Answers	35	August 24th, 2005 08:44 AM
a-b sub routine	jim-garcia	LIVE PLC Questions And Answers	9	February 16th, 2005 07:30 PM
GE LM9070 cannot file changes	jdbrandt	LIVE PLC Questions And Answers	2	August 15th, 2003 05:29 PM
Data Tables	bosshen	LIVE PLC Questions And Answers	5	April 28th, 2003 07:30 PM



This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
*Try our online PLC Simulator- FREE. Click here now to try it.*

February 9th, 2006, 08:43 PM	#2
Steve Bailey Lifetime Supporting Member + Moderator Join Date: Apr 2002 Location: The boondocks of Western Massachusetts USA Posts: 8,243	It was a bit of a struggle, but I managed to get it done. I was unable to get the LM90 files imported into CME. I had to import into VersaPro first and then import the VP folder into CME. In order to successfully import the LM90 files into VP I had to first download the logic and configuration from LM90 to a PLC and then upload from the PLC to LM90. That process created all the files that VP was looking for during the import.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)