Omron NT600M Screen

I am new on PLC and a friend gave me an Omron NT600M screen to play a litle and get aquainted with it he also lended me a plc with a rack. I can not program the screen as I do not have the program to do it, wich is the program and where can I find it.
Many thanks

Software required is Omron NTSS.

Take a look in the Download area at www.mrplc.com

This is a DOS program, so it may or may not work on your computer.

Hope this will help.

gtsuport said:

Software required is Omron NTSS.

Take a look in the Download area at www.mrplc.com

This is a DOS program, so it may or may not work on your computer.

Hope this will help.

Click to expand...

Thanks gtsuport, I searched the page you mentioned could see some Omron programs but could not find the Omron NTSS could you help me with more specifics
Thanks again

Here is a link

http://forums.mrplc.com/index.php?download=93

You will have to register on the site.

Good Luck