1769IF8 scaling
- Thread starter chad k
- Start date
TimWilborne
Lifetime Supporting Member
Very strange, I opened your file and I see the configuration tab with 15.02.00. What's your minor version?
novice
Member
I see 15 and 12. From the Help Window.
TimWilborne
Lifetime Supporting Member
Sorry but I think this might be one for Rockwell Support
novice
Member
May I ask what version you have (major and minor)?
How do I scale an analog input in RS5000 in ladder logic, since the process control is not available in ladder logic. I have 1769-L32E and a 1769-IF8. 4 to 20 ma pressure transducer 0-100 psig range.
I have configured the card for 4 to 20 ma and engineering units. I now would like to have a real number with a range of 0 to 100. How do I get there. I can see my counts. In the past I have used SCP in the 500 family. Not sure in the 5000 family.
I have configured the card for 4 to 20 ma and engineering units. I now would like to have a real number with a range of 0 to 100. How do I get there. I can see my counts. In the past I have used SCP in the 500 family. Not sure in the 5000 family.
Mickey
Lifetime Supporting Member
TimWilborne
Lifetime Supporting Member
15.02.00novice said:
Hi, i will refresh the topic with some problem.
I have a IF-4 input module, configured as 0-10V and engineering units.
The problem is, that my readout for 0-10V is about 0-5240 instead of 0-10,000.
I checked the voltage on port, it shows true 0-10V.
Anybody?
I have a IF-4 input module, configured as 0-10V and engineering units.
The problem is, that my readout for 0-10V is about 0-5240 instead of 0-10,000.
I checked the voltage on port, it shows true 0-10V.
Anybody?
Mickey
Lifetime Supporting Member
There is a 1762-IF4, a 1769_IF4. Which one do you have?
Can you post your program? Zip it first.
Can you post your program? Zip it first.
Similar Topics
I want to measure the tank level and get the sensor output to the PLC. Below are the details :
Tank Height =0 - 3m, the sensor is stalled 0,2m...
Hi, I have a ControlLogix system with 1756-IF16 analogue inputs. I can't scale the inputs at the card as there is a requirement to facilitate...
I know nothing about simaticnet OPC server. I do know Kepware. I would only ever scale raw to engineering in the PLC, but it is possible to scale...
Hi all.
I'm working on a rehab and I'm trying to figure stuff out.
See screenshot at the bottom.
Local:5:I.Data[6] in BTD instruction is a...
Hello all,
First post here. Hitting a wall with finding info on this topic online, and none of my coworkers have a clue.
I have a PanelView...
