Alan Case
Lifetime Supporting Member
I am making an assumption in this question. Please correct me if I am wrong.
a) Slip of a synchronous motor varies with load
If the above statement is true then what would be the approximate variation on say a nominal 1440 rpm 7.5 kw motor running at a) no load
and b) full load ie drawing its nameplate current.
I know there are a lot of variables involved here but I am only after a very rough guide ie 3-5% or less than half a percent etc.
Regards Alan
a) Slip of a synchronous motor varies with load
If the above statement is true then what would be the approximate variation on say a nominal 1440 rpm 7.5 kw motor running at a) no load
and b) full load ie drawing its nameplate current.
I know there are a lot of variables involved here but I am only after a very rough guide ie 3-5% or less than half a percent etc.
Regards Alan