kali rajan
Member
Hai All,
In my application, the Micrologix 1400 for PLC and FactoryTalk View SE for SCADA Screens are used for Controlling and monitoring the Outward &
Inward loads for a Plant from 4 Conveyors. Also Displaying the Conveyor details of load for the Each loading conveyors. So, I need to interface the Micrologix 1400 with 4 LED Display. Is it Possible?...
The Main function are given below,
I Attached the Photo for this Application Please go through for any clarifications,
1) Sensor will count the Number of bags going through the truck loading conveyor
2) PLC will read the the sensor output and store the value in SCADA
3) SCADA Will generate the report for the individual truck (Truck number to be punched
manually in scada)
4) SCADA Should give the command to the operator through LED board what to load on the truck
loading conveyor
5) SCADA Should generate the report of inward and outward and stored stocks (inward will be
punched manually on shift basis through scada)
But I didn't know about that concept of LED Board for this application, so please suggest some ideas about the LED Boards and also please give any Model for the LED Boards...
Please send some ideas as soon as possible...
Please see the Attached photos for any clarifications in this application...
Thanks,
Kali Rajan M
+91 8015604415
[email protected]
In my application, the Micrologix 1400 for PLC and FactoryTalk View SE for SCADA Screens are used for Controlling and monitoring the Outward &
Inward loads for a Plant from 4 Conveyors. Also Displaying the Conveyor details of load for the Each loading conveyors. So, I need to interface the Micrologix 1400 with 4 LED Display. Is it Possible?...
The Main function are given below,
I Attached the Photo for this Application Please go through for any clarifications,
1) Sensor will count the Number of bags going through the truck loading conveyor
2) PLC will read the the sensor output and store the value in SCADA
3) SCADA Will generate the report for the individual truck (Truck number to be punched
manually in scada)
4) SCADA Should give the command to the operator through LED board what to load on the truck
loading conveyor
5) SCADA Should generate the report of inward and outward and stored stocks (inward will be
punched manually on shift basis through scada)
But I didn't know about that concept of LED Board for this application, so please suggest some ideas about the LED Boards and also please give any Model for the LED Boards...
Please send some ideas as soon as possible...
Please see the Attached photos for any clarifications in this application...
Thanks,
Kali Rajan M
+91 8015604415
[email protected]